Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

English
Italian

Translating step 2

Step 2
Lift the end of the SSD up enough to pass over the speaker directly behind it. Do not lift the SSD too high, or you could damage the contacts or socket. Pull the SSD straight out of its socket on the logic board.
  • Lift the end of the SSD up enough to pass over the speaker directly behind it.

  • Do not lift the SSD too high, or you could damage the contacts or socket.

  • Pull the SSD straight out of its socket on the logic board.

Solleva il lato dell'SSD quanto basta perché superi in altezza l'altoparlante che si trova subito dietro.

Non sollevare troppo l'SSD perché potresti danneggiare i contatti con lo zoccolino.

Tira l'SSD fuori dal suo zoccolino sulla scheda logica.

Your contributions are licensed under the open source Creative Commons license.