Skip to main content

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 22 guides that include this step.

English
German

Translating step 3

Step 3
Use a spudger or a clean fingernail to disconnect the front camera flex cable by prying it straight up from its socket on the logic board. Use a spudger or a clean fingernail to disconnect the front camera flex cable by prying it straight up from its socket on the logic board.
  • Use a spudger or a clean fingernail to disconnect the front camera flex cable by prying it straight up from its socket on the logic board.

Löse mit dem flachen Ende eines Spudgers oder einem Fingernagel den Stecker des Frontkamerakabels von seinem Anschluss vom Logic Board, indem du es gerade nach oben hebelst.

[* black] Use the flat end of a spudger,spudger or a fingernail,clean fingernail to disconnect the front camera flex cable by prying it straight up from its socket on the logic board.
[* black] Use the flat end of a spudger,spudger or a fingernail,clean fingernail to disconnect the front camera flex cable by prying it straight up from its socket on the logic board.

Your contributions are licensed under the open source Creative Commons license.