Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
Dutch

Translating step 22

Step 22
Use the plastic spudger to remove the ribbon cable from the motherboard by placing the spudger under the ribbon cable connector and pulling up. Remove the 2.8mm screw from the motherboard. Do not try to remove the motherboard from the camera yet.
  • Use the plastic spudger to remove the ribbon cable from the motherboard by placing the spudger under the ribbon cable connector and pulling up.

  • Remove the 2.8mm screw from the motherboard.

  • Do not try to remove the motherboard from the camera yet.

  • Carefully rotate the motherboard upward.

  • Use the plastic spudger to remove the ribbon cable from the bottom of the motherboard by placing the spudger under the ribbon cable connector and pulling up.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.