Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
French

Translating step 21

Step 21
Remove the following two Phillips screws from the side of the camera with the three connector ports with a Phillips head screwdriver: One 2.5mm screw
  • Remove the following two Phillips screws from the side of the camera with the three connector ports with a Phillips head screwdriver:

  • One 2.5mm screw

  • One 3.3mm screw

  • Pull the metal shield away from the camera.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.