Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
French

Translating step 18

Step 18
Release the plastic locking tab of the upper ribbon cable with the plastic spudger. Pull the top ribbon cable from its mount with the fine tip metal tweezers. Remove the bottom ribbon cable with the fine tip metal tweezers by pulling it toward the flash switch side of the camera.
  • Release the plastic locking tab of the upper ribbon cable with the plastic spudger.

  • Pull the top ribbon cable from its mount with the fine tip metal tweezers.

  • Remove the bottom ribbon cable with the fine tip metal tweezers by pulling it toward the flash switch side of the camera.

  • The bottom ribbon cable does not have a locking tab; it simply slides in and out.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.