Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
German

Translating step 15

Step 15
Remove the 2.5mm Phillips screw from the front plate with a Phillips head screwdriver. Pull up on the top portion of the camera to separate the top casing from the camera body.
  • Remove the 2.5mm Phillips screw from the front plate with a Phillips head screwdriver.

  • Pull up on the top portion of the camera to separate the top casing from the camera body.

  • Make sure the flash is up. Otherwise the top casing will not release.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.