Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
German

Translating step 10

Step 10
Remove the following three Phillips screws securing the silver plate with a Philips Head screwdriver: Two 2.9mm screws on the front of the camera One 1.8mm screw on the bottom of the camera
  • Remove the following three Phillips screws securing the silver plate with a Philips Head screwdriver:

  • Two 2.9mm screws on the front of the camera

  • One 1.8mm screw on the bottom of the camera

  • Lift the silver plate away from the camera.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.