Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
French

Translating step 1

Step 1
Remove the two  4mm Hex screws that connect the grip to the camera with a Hex head screwdriver. Remove the two Phillips screws to the left of the hex screws with a Phillips head screwdriver:
  • Remove the two 4mm Hex screws that connect the grip to the camera with a Hex head screwdriver.

  • Remove the two Phillips screws to the left of the hex screws with a Phillips head screwdriver:

  • One 2mm screw

  • One 3mm screw

  • Remove the grip from the front of the camera by pulling it away from the lens and then away from the camera.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.