Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 23 guides that include this step.

English
Spanish

Translating step 2

Step 2
Lift the bottom edge of the lower case off the rest of the 3DS. There are still two ribbon cables connecting the mother board to the case, so be sure not to pull the lower case all the way off. Use a plastic opening tool to pry the shoulder button ribbon cables off their sockets on the motherboard.
  • Lift the bottom edge of the lower case off the rest of the 3DS.

  • There are still two ribbon cables connecting the mother board to the case, so be sure not to pull the lower case all the way off.

  • Use a plastic opening tool to pry the shoulder button ribbon cables off their sockets on the motherboard.

  • Remove the lower case from the device.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.