任天堂3DS背盖更换

Notice: You are editing a prerequisite guide. Any changes you make will affect all 25 guides that include this step.

Next step

Translating step 1

English

Chinese

Step 1

Loosen the rear screws

Use a Phillips PH00 screwdriver to loosen the four screws along the top of the back cover.
All screws in this device are JIS screws. Official iFixit PH000-PH1 Phillips screwdrivers are designed to be compatible with JIS screws, so they are safe to use. Using a screwdriver other than an official iFixit screwdriver or a JIS screwdriver may result in stripped screws.
The screws are held in place by locking washers, and will not come out of the back cover.

+	[title] Loosen the rear screws
	[* red] Use a Phillips PH00 screwdriver to loosen the four screws along the top of the back cover.
-	[* icon_note] All screws in this device are [guide\|93991\|JIS screws\|stepid=176809\|new_window=true]. ~~All official~~ [product\|IF145-006\|iFixit Phillips screwdrivers\|new_window=true] are designed to be compatible with JIS screws, so they are safe to use. Using a screwdriver other than an official iFixit screwdriver or a JIS screwdriver may result in [guide\|13213\|stripped screws\|new_window=true].
+	[* icon_note] All screws in this device are [guide\|93991\|JIS screws\|stepid=176809\|new_window=true]. Official [product\|IF145-006\|iFixit PH000-PH1 Phillips screwdrivers\|new_window=true] are designed to be compatible with JIS screws, so they are safe to use. Using a screwdriver other than an official iFixit screwdriver or a JIS screwdriver may result in [guide\|13213\|stripped screws\|new_window=true].
	[* icon_note] The screws are held in place by locking washers, and will not come out of the back cover.

Your contributions are licensed under the open source Creative Commons license.