Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 23 guides that include this step.

English
Japanese

Translating step 5

Step 5
Make sure the battery is disconnected before you disconnect or reconnect the cable in this step. Disconnect the display cable by prying it straight up from its socket on the logic board.
  • Make sure the battery is disconnected before you disconnect or reconnect the cable in this step.

  • Disconnect the display cable by prying it straight up from its socket on the logic board.

この手順では、ケーブルの接続を外す前に、バッテリーの接続が外れているか必ず確認してください。

ディスプレイケーブルをロジックボードのソケットからまっすぐ引き上げて、接続を外します。

Your contributions are licensed under the open source Creative Commons license.