Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 23 guides that include this step.

English
Spanish

Translating step 3

Step 3
Use a spudger or a clean fingernail to disconnect the front camera flex cable by prying it straight up from its socket on the logic board. Use a spudger or a clean fingernail to disconnect the front camera flex cable by prying it straight up from its socket on the logic board.
  • Use a spudger or a clean fingernail to disconnect the front camera flex cable by prying it straight up from its socket on the logic board.

Utiliza el extremo plano de un spudger, o una uña , para desconectar el cable de la cámara de flexión delantera haciendo palanca hacia arriba desde la base correspondiente en la placa lógica.

Your contributions are licensed under the open source Creative Commons license.