Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
Japanese

Translating step 3

Step 3
If present, use a plastic opening tool to help remove the piece of tape covering the end of the dock connector cable. Use the edge of a plastic opening tool to carefully pry the dock connector cable's connector up from its socket on the logic board. Peel the dock connector ribbon cable off the rear panel.
  • If present, use a plastic opening tool to help remove the piece of tape covering the end of the dock connector cable.

  • Use the edge of a plastic opening tool to carefully pry the dock connector cable's connector up from its socket on the logic board.

  • Peel the dock connector ribbon cable off the rear panel.

ドックコネクタケーブルの先端を覆っているテープがあれば、プラスチック製開口ツールを使って剥がします。

プラスチック製開口ツールの先端を使って、ロジックボード上のソケットからドックコネクタケーブルのコネクタを注意深く持ち上げます。

リアパネルからドックコネクタリボンケーブルを剥がします。

Your contributions are licensed under the open source Creative Commons license.