Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
Japanese

Translating step 7

Step 7
Use the edge of a plastic opening tool to flip up the retainer securing the control board cable connector to its socket on the logic board. Pull the connector away from its socket on the logic board.
  • Use the edge of a plastic opening tool to flip up the retainer securing the control board cable connector to its socket on the logic board.

  • Pull the connector away from its socket on the logic board.

  • Do not lift the cable upward as you disconnect it.

プラスチック製開口ツールの先端を使って、コントロールボードのケーブルコネクタをロジックボード上のソケットに固定しているリテーナーを跳ね上げます。

ロジックボード上のソケットからコネクタを引き離します。

コネクタの接続を外す際は、ケーブルを持ち上げないでください。

Your contributions are licensed under the open source Creative Commons license.