Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
French

Translating step 7

Step 7
Use the edge of a plastic opening tool to flip up the retainer securing the control board cable connector to its socket on the logic board. Pull the connector away from its socket on the logic board.
  • Use the edge of a plastic opening tool to flip up the retainer securing the control board cable connector to its socket on the logic board.

  • Pull the connector away from its socket on the logic board.

  • Do not lift the cable upward as you disconnect it.

Utilisez le bord d'un outil d'ouverture en plastique pour faire pivoter le dispositif de retenue fixant le connecteur du câble de la carte de contrôle à sa prise sur la carte mère.

Retirez le connecteur de sa prise sur la carte mère.

Ne soulevez pas le câble vers le haut lorsque vous le déconnectez.

Your contributions are licensed under the open source Creative Commons license.