Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 39 guides that include this step.

English
Japanese

Translating step 2

Step 2
Use the edge of a plastic opening tool to peel the digitizer cable off the shields on the logic board. Carefully pull the digitizer cable off the adhesive securing it to the side of the rear case.
  • Use the edge of a plastic opening tool to peel the digitizer cable off the shields on the logic board.

  • Carefully pull the digitizer cable off the adhesive securing it to the side of the rear case.

プラスチックの開口ツールの先端を使って、ロジックボード上のシールドからデジタイザーケーブルを剥がします。

慎重にデジタイザーケーブルを、リアケース横に固定している接着剤から剥がします。

Your contributions are licensed under the open source Creative Commons license.