Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 13 guides that include this step.

English
Japanese

Translating step 1

Step 1
Remove the following 3 screws:
  • Remove the following 3 screws:

  • Two 3 mm Phillips near the right speaker.

  • One 6 mm Phillips threaded through a hole in a plastic finger above the subwoofer.

  • Be careful not to over-tighten the screw above the subwoofer too tight or the plastic could crack.

  • Santa Rosa and Penryn MacBooks do not have a c-channel. If you are disassembling either of these models, remove only the single 3 mm Phillips screw from the right speaker and skip step 26.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.