Skip to main content
English
Chinese

Translating step 16

Step 16
Remove the two PH 0 phillips screws. After the clamp is removed the spacer under it will also need to be removed. Remove the power button by prying up on the hook that's hooked into the motherboard.
Remove Heat Sink Clamp and Power Button
  • Remove the two PH 0 phillips screws.

  • After the clamp is removed the spacer under it will also need to be removed.

  • Remove the power button by prying up on the hook that's hooked into the motherboard.

  • After the hook is lifted the button will slide back and out.

卸下两个PH 0十字螺丝。

在拆下夹具后还需要拆下夹具。

通过撬起挂在主板上的挂钩上取下电源按钮。

挂钩被抬起后,按钮将向后滑动。

Your contributions are licensed under the open source Creative Commons license.