Skip to main content
English
Japanese

Translating step 16

Step 16
Remove the two PH 0 phillips screws. After the clamp is removed the spacer under it will also need to be removed. Remove the power button by prying up on the hook that's hooked into the motherboard.
Remove Heat Sink Clamp and Power Button
  • Remove the two PH 0 phillips screws.

  • After the clamp is removed the spacer under it will also need to be removed.

  • Remove the power button by prying up on the hook that's hooked into the motherboard.

  • After the hook is lifted the button will slide back and out.

PH 0プラスねじ2本を取り外します。

クランプを取り外したら、その下のスペーサも取り外してください。

マザーボードに掛かっているフックを引き上げて、電源ボタンを取り外します。

フックを持ち上げたら、手前に電源ボタンをスライドさせて取り外します。

Your contributions are licensed under the open source Creative Commons license.