Skip to main content
English
Italian

Translating step 16

Step 16
Remove the two PH 0 phillips screws. After the clamp is removed the spacer under it will also need to be removed. Remove the power button by prying up on the hook that's hooked into the motherboard.
Remove Heat Sink Clamp and Power Button
  • Remove the two PH 0 phillips screws.

  • After the clamp is removed the spacer under it will also need to be removed.

  • Remove the power button by prying up on the hook that's hooked into the motherboard.

  • After the hook is lifted the button will slide back and out.

Rimuovi le due viti a croce Phillips #0.

Dopo che avrai rimosso il dissipatore, dovrai rimuovere anche il distanziatore al di sotto di esso.

Rimuovi il tasto accensione facendo leva verso l'alto sul gancetto fissato sulla scheda madre.

Non appena avrai sollevato il tasto, questo scorrerĂ  indietro per poi essere rimosso.

Your contributions are licensed under the open source Creative Commons license.