Skip to main content
English
Spanish

Translating step 16

Step 16
Remove the two PH 0 phillips screws. After the clamp is removed the spacer under it will also need to be removed. Remove the power button by prying up on the hook that's hooked into the motherboard.
Remove Heat Sink Clamp and Power Button
  • Remove the two PH 0 phillips screws.

  • After the clamp is removed the spacer under it will also need to be removed.

  • Remove the power button by prying up on the hook that's hooked into the motherboard.

  • After the hook is lifted the button will slide back and out.

Retira los dos tornillos phillips PH 0

Después de que la abrazadera sea retirada, el espaciador de debajo también necesitará ser retirado.

Retira el botón de encendido levantando el gancho que está enganchado a la placa madre.

Después que el gancho esté levantado el botón de encendido se deslizará hacía atrás y fuera.

Your contributions are licensed under the open source Creative Commons license.