Skip to main content
English
French

Translating step 14

Step 14
Remove twelve T9 security torx screws Be careful to not lose the small metal nut under the black cover on the top left side. This nut is for one of the two long screws that hold the power supply that was removed in previous steps. Remove six PH 0 phillips screws
Remove Top Metal Shield
  • Remove twelve T9 security torx screws

  • Be careful to not lose the small metal nut under the black cover on the top left side. This nut is for one of the two long screws that hold the power supply that was removed in previous steps.

  • Remove six PH 0 phillips screws

  • Remove three PH 0 phillips screws

  • Remove two PH 0 phillips screws

  • Pull the top metal shield off of the console.

Retirez 12 vis Torx T9.

Faites attention à ne pas perdre le petit écrou métallique sous le cache noir en haut à gauche. Cet écrou est destiné à l'une des deux grandes vis qui maintiennent le bloc d'alimentation qui a été retiré lors des étapes précédentes.

Retirez 6 vis cruciformes Ph 0.

Retirez 3 vis cruciformes Ph 0.

Retirez 2 vis cruciformes Ph 0.

Retirez la protection métallique supérieure de la console.

Your contributions are licensed under the open source Creative Commons license.