Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.


Translating step 6

Step 6
Use a spudger to wedge underneath the flash
  • Use a spudger to wedge underneath the flash

  • Pry (up and down) to separate.

  • It is important to choose a tool that is ESD-safe to avoid accidental damage to the device. A black nylon spudger, or plastic opening tool, should be used whenever possible.

Utilizando un spudger, inserte la herramienta en la ranura mostrada y empuje hacia arriba.

Al trabajar con la electrónica, es importante elegir una herramienta que sea resistente a ESD para evitar daños accidentales al dispositivo. Siempre que sea posible, se debe usar el spudger de nylon negro regular o una herramienta de apertura de plástico.

Your contributions are licensed under the open source Creative Commons license.