Menu

Your Settings

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Back to Guide
English
Chinese
Previous step Next step

Translating step 2

Step 2
Disconnect the three cables attached to the motherboard. Do not pull the cables by their wires. This can lead to damage to the cables. The large, black cable is connected to the screen. Carefully wiggle the cable out by gripping the black tape with your fingers.

  • Disconnect the three cables attached to the motherboard.

  • Do not pull the cables by their wires. This can lead to damage to the cables.

  • The large, black cable is connected to the screen. Carefully wiggle the cable out by gripping the black tape with your fingers.

  • There may be clear tape holding the screen connector in place.

  • The cable for the fan and speaker use similar connectors. Use the black spudger or carefully grip the sides of each connector with your fingers to slowly pull them out.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.