Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 38 guides that include this step.

English
Italian

Translating step 3

Step 3
Remove the two Phillips screws from either side of the right wall of the battery compartment (not the ones closest to the battery connector).
  • Remove the two Phillips screws from either side of the right wall of the battery compartment (not the ones closest to the battery connector).

  • Two 6.25 mm Phillips #000. (Head: 4 mm. dia. x .5mm thick)

Rimuovere le due viti con testa a croce da entrambi i lati della parete destra dello scomparto della batteria (non quelle più vicine al connettore della batteria).

Due viti con testa a croce n. 000 da 6,25 mm. (Testa: 4 mm di diametro x 0,5 mm di spessore)

Your contributions are licensed under the open source Creative Commons license.