Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
Spanish

Translating step 15

Step 15
Continue derouting the cellular antenna cable from the second and third logic board clips. Use the pointed tip of a spudger to gently pry the cellular antenna cable from the middle logic board clip. Don't try to remove it by pulling on the cable, as it will tear easily.
  • Continue derouting the cellular antenna cable from the second and third logic board clips.

  • Use the pointed tip of a spudger to gently pry the cellular antenna cable from the middle logic board clip.

  • Don't try to remove it by pulling on the cable, as it will tear easily.

  • In order for the cable to reach its socket on the logic board, you must route it above the logic board and underneath the audio control flex cable, as shown in the first photo.

Continúa desviando el cable de la antena celular del segundo y tercer clip de la placa lógica.

Usa el extremo puntiagudo de un spudger para levantar el cable de antena celular del clip del medio de la placa lógica.

No intentes removerlo tirando del cable ya que se puede arrancarse fácilmente.

Para que el cable llegue su cable en la placa lógica, debes dirigirlo por arriba de la placa lógica y por debajo del cable flexible del control de audio, como se muestra en la primera foto.

Your contributions are licensed under the open source Creative Commons license.