Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
French

Translating step 12

Step 12
Remove the following screws: One 1.3 mm Phillips screw
  • Remove the following screws:

  • One 1.3 mm Phillips screw

  • One 2.6 mm Phillips screw

  • One 2.2 mm standoff screw

  • Standoff screws are best removed using a standoff screwdriver or bit.

  • In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

Dévissez les vis suivantes :

Une vis cruciforme de 1,3 mm

Une vis cruciforme de 2,6 mm

Une vis d'entretoise de 2,2 mm

Le mieux est de dévisser les vis d'entretoise à l'aide d'un embout pour vis d'entretoise et d'un manche du tournevis.

Un petit tournevis plat peut aussi faire l'affaire, mais veillez à ce qu'il ne glisse pas et n'endommage pas les composants qui se trouvent autour.

[* black] Remove the following screws:
[* red] One 1.3 mm Phillips screw
[* orange] One 2.6 mm Phillips screw
[* yellow] One 2.2 mm standoff screw
- [* icon_note] Standoff screws are best removed using an [product|IF145-343|new_window=true] and [product|IF145-326|driver handle|new_window=true].
+ [* icon_note] Standoff screws are best removed using a [product|IF145-388-4|standoff screwdriver|new_window=true] or bit.
[* icon_caution] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

Your contributions are licensed under the open source Creative Commons license.