Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
Spanish

Translating step 12

Step 12
Remove the following screws: One 1.3 mm Phillips screw
  • Remove the following screws:

  • One 1.3 mm Phillips screw

  • One 2.6 mm Phillips screw

  • One 2.2 mm standoff screw

  • Standoff screws are best removed using a standoff screwdriver or bit.

  • In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

Remueve los siguientes tornillos:

Un tornillo Phillips de 1.3 mm

Un tornillo Phillips de 2.6 mm

Un tornillo separado de 2.2 mm

Los tornillos separadores se remueven mejor utilizando una punta de destornillador para tornillo separador de iPhone y un mango de destornillador.

Si no hay otra opción, un pequeño destornillador para cabeza plano hará el trabajo, pero ten cuidado para asegurarte de que no se resbale y dañe los componentes circundantes.

[* black] Remove the following screws:
[* red] One 1.3 mm Phillips screw
[* orange] One 2.6 mm Phillips screw
[* yellow] One 2.2 mm standoff screw
- [* icon_note] Standoff screws are best removed using an [product|IF145-343|new_window=true] and [product|IF145-326|driver handle|new_window=true].
+ [* icon_note] Standoff screws are best removed using a [product|IF145-388-4|standoff screwdriver|new_window=true] or bit.
[* icon_caution] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

Your contributions are licensed under the open source Creative Commons license.