Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
German

Translating step 10

Step 10
Use the flat end of a spudger to disconnect the Lightning connector flex cable from the logic board. Use the flat end of a spudger to disconnect the Lightning connector flex cable from the logic board.
  • Use the flat end of a spudger to disconnect the Lightning connector flex cable from the logic board.

Trenne das Flachbandkabel mit dem Lightning Connectors mit dem flachen Ende eines Spudgers vom Logic Board.

Your contributions are licensed under the open source Creative Commons license.