Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 24 guides that include this step.

English
French

Translating step 3

Step 3
Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case. Pulling too hard may damage the display assembly. Apply just enough pressure to create a small gap between the display assembly and the rear case.
  • Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.

  • Pulling too hard may damage the display assembly. Apply just enough pressure to create a small gap between the display assembly and the rear case.

Soulevez la ventouse de façon ferme et constante pour créer un petit interstice entre l'écran et le boîtier arrière.

Ne tirez pas trop fort sur la ventouse, vous risqueriez d'endommager l'écran. Soulevez juste assez pour créer un petit interstice entre l'écran et le boîtier arrière.

Your contributions are licensed under the open source Creative Commons license.