Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 21 guides that include this step.

English
Japanese

Translating step 5

Step 5
Make sure the battery is disconnected before you disconnect or reconnect the cable in this step. Disconnect the home button/fingerprint sensor cable by prying it straight up from its socket on the logic board.
  • Make sure the battery is disconnected before you disconnect or reconnect the cable in this step.

  • Disconnect the home button/fingerprint sensor cable by prying it straight up from its socket on the logic board.

この手順ではケーブルの接続を外す、もしくは再接続する前に、バッテリーが外れていることを確認してください。

ホームボタン/指紋センサーケーブルをまっすぐ持ち上げて、ロジックボード上のソケットから接続を外します。

Your contributions are licensed under the open source Creative Commons license.