Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 21 guides that include this step.

English
Spanish

Translating step 5

Step 5
Make sure the battery is disconnected before you disconnect or reconnect the cable in this step. Disconnect the home button/fingerprint sensor cable by prying it straight up from its socket on the logic board.
  • Make sure the battery is disconnected before you disconnect or reconnect the cable in this step.

  • Disconnect the home button/fingerprint sensor cable by prying it straight up from its socket on the logic board.

Asegúrate de que la batería está desconectada antes de desconectar o reconectar el cable en este paso.

Desconecta el cable botón home/lector de huellas alzándolo hacia arriba del zocalo en la placa lógica.

Your contributions are licensed under the open source Creative Commons license.