Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 21 guides that include this step.

English
German

Translating step 3

Step 3
Be careful to only pry up on the connector itself and not the socket on the logic board. Use a plastic opening tool to disconnect the front-facing camera and sensor cable connector.
  • Be careful to only pry up on the connector itself and not the socket on the logic board.

  • Use a plastic opening tool to disconnect the front-facing camera and sensor cable connector.

Achte darauf, dass du nur den Stecker selbst und nicht die Buchse auf dem Logic Board abhebelst.

Mit einem Öffnungswerkzeug aus Plastik kannst du die Frontkamera und den Sensorkabelstecker abziehen.

Your contributions are licensed under the open source Creative Commons license.