Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 11 guides that include this step.

English
German

Translating step 1

Step 1
Use the flat end of a spudger to pry the AirPort/Bluetooth ribbon cable connector up from its socket on the logic board.
  • Use the flat end of a spudger to pry the AirPort/Bluetooth ribbon cable connector up from its socket on the logic board.

Benutze das flache Ende eines Spudgers, um den Verbinder des AirPort/Bluetooth Flachbandkabels aus seinem Anschluss auf dem Logic Board zu hebeln.

Your contributions are licensed under the open source Creative Commons license.