Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
German

Translating step 2

Step 2
Make sure you've ejected the SIM tray before performing this step. Hold the midframe by the edges and lift it upwards while pushing down against the battery with one finger. There is a small amount of adhesive in each corner holding the midframe to the display assembly. Apply constant force until the midframe separates.
  • Make sure you've ejected the SIM tray before performing this step.

  • Hold the midframe by the edges and lift it upwards while pushing down against the battery with one finger.

  • There is a small amount of adhesive in each corner holding the midframe to the display assembly. Apply constant force until the midframe separates.

  • Remove the midframe.

Drücke mit einem Finger den Akku nach unten während du gleichzeitig den Mittelrahmen an den Kanten festhältst und nach oben hebst.

Der Mittelrahmen ist mit ein wenig Klebstoff in jeder Ecke an der Displayeinheit befestigt. Übe gleichmäßigen Druck aus, bis sich der Mittelrahmen ablöst.

Entferne den Mittelrahmen.

Your contributions are licensed under the open source Creative Commons license.