Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 60 guides that include this step.

English
German

Translating step 2

Step 2
Bend the battery cable slightly away from its socket on the logic board so it does not accidentally connect itself while you work.
  • Bend the battery cable slightly away from its socket on the logic board so it does not accidentally connect itself while you work.

Biege das Akkukabel vorsichtig weg vom Sockel des Logic Boards, damit es sich nicht aus Versehen beim Arbeiten wieder verbindet.

Your contributions are licensed under the open source Creative Commons license.