Skip to main content

Fix Your Stuff

Right to Repair


Notice: You are editing a prerequisite guide. Any changes you make will affect all 64 guides that include this step.


Translating step 1

Step 1
Remove the following ten screws:
  • Remove the following ten screws:

  • Three 14.4 mm Phillips #00 screws

  • Three 3.5 mm Phillips #00 screws

  • Four 3.5 mm shouldered Phillips #00 screws

  • When replacing the small screws, align them perpendicular to the slight curvature of the case (they don't go straight down).

Retirez les dix vis suivantes :

Trois vis Phillips #00 14,4 mm

Trois vis Phillips #00 3,5 mm

Quatre vis à épaulement Phillips #00 3,5 mm

Quand vous replacerez les 2 petites vis, alignez les perpendiculairement à la légère courbe de la coque (elles ne se vissent pas droites).

Your contributions are licensed under the open source Creative Commons license.