Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
Italian

Translating step 1

Step 1
If the screw is not turning, do not force it. This can strip the screw.  See the How to Remove a Stripped Screw guide if the screw is already stripped. Using the #00 screwdriver, unscrew the six, 6mm Phillips screws.
Open the device
  • If the screw is not turning, do not force it. This can strip the screw. See the How to Remove a Stripped Screw guide if the screw is already stripped.

  • Using the #00 screwdriver, unscrew the six, 6mm Phillips screws.

  • Use the spudger to pry into the space between the blue back cover and the white body to take off the back cover.

Se una vite non si svita, non forzarla. Forzandola potresti spanarla. Leggi la guida Come rimuovere una vite danneggiata se è già spanata.

Usando un cacciavite a croce #00, svita le sei viti a croce Phillips da 6 mm.

Usa lo spudger per fare leva nello spazio tra la copertura posteriore e il corpo bianco per rimuovere la copertura.

Your contributions are licensed under the open source Creative Commons license.