Skip to main content

Fix Your Stuff

Right to Repair

Store

English
Japanese

Translating step 1

Step 1
Remove the two 2.0 mm Phillips screws securing the power button bracket to the outer case. Slightly pull the power button cable bracket away from the outer case. If the power button happens to accidentally fall out, take note of the correct orientation. The metal loop should be facing downwards and the outward edges should be on top.
  • Remove the two 2.0 mm Phillips screws securing the power button bracket to the outer case.

  • Slightly pull the power button cable bracket away from the outer case.

  • If the power button happens to accidentally fall out, take note of the correct orientation. The metal loop should be facing downwards and the outward edges should be on top.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.