Skip to main content

Fix Your Stuff

Right to Repair

Store

English
Chinese

Translating step 3

Step 3
In the next three steps, take care to pry up only on the cable connectors, and not on their sockets on the logic board. Use the flat end of a spudger to disconnect the front-facing camera and sensor cable connector. Use the flat end of a spudger to disconnect the front-facing camera and sensor cable connector.
  • In the next three steps, take care to pry up only on the cable connectors, and not on their sockets on the logic board.

  • Use the flat end of a spudger to disconnect the front-facing camera and sensor cable connector.

接下来的三步,就是小心的把三根排线挑起,不要撬到主板上的排线座子。

用撬棒平口处挑开前置摄像头和感应器排线。

Your contributions are licensed under the open source Creative Commons license.