Skip to main content

Fix Your Stuff

Right to Repair

Store

English
French

Translating step 3

Step 3
In the next three steps, take care to pry up only on the cable connectors, and not on their sockets on the logic board. Use the flat end of a spudger to disconnect the front-facing camera and sensor cable connector. Use the flat end of a spudger to disconnect the front-facing camera and sensor cable connector.
  • In the next three steps, take care to pry up only on the cable connectors, and not on their sockets on the logic board.

  • Use the flat end of a spudger to disconnect the front-facing camera and sensor cable connector.

Pendant les trois prochaines étapes veillez à ne déconnecter que les connecteurs des nappes et surtout pas les connections sur la carte mère.

Utilisez l'extrémité plate d'une spatule (spudger) pour déconnecter la nappe de la caméra avant et de capteur.

Your contributions are licensed under the open source Creative Commons license.