Skip to main content

Fix Your Stuff

Right to Repair

Store

English
German

Translating step 3

Step 3
In the next three steps, take care to pry up only on the cable connectors, and not on their sockets on the logic board. Use the flat end of a spudger to disconnect the front-facing camera and sensor cable connector. Use the flat end of a spudger to disconnect the front-facing camera and sensor cable connector.
  • In the next three steps, take care to pry up only on the cable connectors, and not on their sockets on the logic board.

  • Use the flat end of a spudger to disconnect the front-facing camera and sensor cable connector.

Achte während der nächsten drei Schritte darauf, nur an den Kabelsteckern zu hebeln und nicht an deren Fassungen auf dem Logic Board.

Verwende die flache Seite eines Spudgers, um die Frontkamera und den Sensorenkabelstecker zu trennen.

Your contributions are licensed under the open source Creative Commons license.