Skip to main content

Fix Your Stuff

Right to Repair

Store

English
Spanish

Translating step 1

Step 1
While holding the front panel open at about a 90º angle, remove the following screws securing the front panel assembly cable bracket:
  • While holding the front panel open at about a 90º angle, remove the following screws securing the front panel assembly cable bracket:

  • Three 1.3 mm Phillips #00 screws

  • One 3.0 mm Phillips #00 screw

  • Don't lose track of this screw! It's very important that the one 3.0 mm screw goes in the top-right corner of the plate. Anywhere else may cause damage to the logic board.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.