Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Back to Guide
English
French
Previous step Next step

Translating step 3

Step 3
There is a notch on the underside of the display just above the headphone jack that is the safest place to begin prying the phone open. Pull up on the suction cup to slightly separate the front panel assembly from the rear case. Take your time and apply firm, constant force. The display assembly is a much tighter fit than most devices and is held down with adhesive.

  • There is a notch on the underside of the display just above the headphone jack that is the safest place to begin prying the phone open.

  • Pull up on the suction cup to slightly separate the front panel assembly from the rear case.

  • Take your time and apply firm, constant force. The display assembly is a much tighter fit than most devices and is held down with adhesive.

  • Once a small gap has been opened, insert the flat end of a spudger above the headphone jack.

Il y a une encoche sous l'écran juste au dessus de la prise de casque, c'est le meilleur endroit pour commencer à ouvrir le téléphone.

Tirez sur la ventouse pour séparer légèrement l'écran du boîtier arrière.

Prenez votre temps et appliquez une force ferme et constante. L'écran est bien plus solidement fixé que la plupart des appareil et il est maintenu par de l'adhésif.

Dès lors qu'un petit interstice apparait, insérez l'extrémité plate d'une spatule (spudger) au dessus de la prise de casque.

Your contributions are licensed under the open source Creative Commons license.