Skip to main content

Fix Your Stuff

Right to Repair

Store

English
Italian

Translating step 4

Step 4
Insert a second plastic card underneath the battery contacts. Rotate the plastic card around the lower right corner of the battery to begin breaking up the adhesive along the lower edge. Carefully maneuver the card over the top of the speaker ribbon cables so as not to damage them.
  • Insert a second plastic card underneath the battery contacts.

  • Rotate the plastic card around the lower right corner of the battery to begin breaking up the adhesive along the lower edge.

  • Carefully maneuver the card over the top of the speaker ribbon cables so as not to damage them.

Inserisci una seconda scheda di plastica sotto i contatti della batteria.

Ruota la scheda attorno all'angolo destro in basso della batteria per cominciare a rompere l'adesivo lungo il bordo inferiore.

Fai attenzione a far passare la scheda sopra i cavi a nastro degli altoparlanti in modo tale da non danneggiarli.

Your contributions are licensed under the open source Creative Commons license.