Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
Italian

Translating step 9

Step 9
In the following steps, you will be separating the home button gasket from the iPad's front panel. This gasket is extremely delicate and can tear easily. If the gasket does not separate easily from the front panel, reapply heat using the iOpener before continuing. Use the pointed end of a spudger to gently pry the Home Button assembly up from the display. Use the pointed end of a spudger to gently pry the Home Button assembly up from the display.
  • In the following steps, you will be separating the home button gasket from the iPad's front panel. This gasket is extremely delicate and can tear easily. If the gasket does not separate easily from the front panel, reapply heat using the iOpener before continuing.

  • Use the pointed end of a spudger to gently pry the Home Button assembly up from the display.

Nei prossimi passi dovrai separare la guarnizione del tasto Home dal pannello anteriore dell'iPad. Questa guarnizione è estremamente delicata e si può strappare facilmente. Se la guarnizione non si separa facilmente dal pannello anteriore, riscaldalo ancora con l'iOpener prima di continuare.

Usa la punta di uno spudger per sollevare delicatamente il gruppo del tasto Home dallo schermo.

Your contributions are licensed under the open source Creative Commons license.