Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
French

Translating step 9

Step 9
In the following steps, you will be separating the home button gasket from the iPad's front panel. This gasket is extremely delicate and can tear easily. If the gasket does not separate easily from the front panel, reapply heat using the iOpener before continuing. Use the pointed end of a spudger to gently pry the Home Button assembly up from the display. Use the pointed end of a spudger to gently pry the Home Button assembly up from the display.
  • In the following steps, you will be separating the home button gasket from the iPad's front panel. This gasket is extremely delicate and can tear easily. If the gasket does not separate easily from the front panel, reapply heat using the iOpener before continuing.

  • Use the pointed end of a spudger to gently pry the Home Button assembly up from the display.

Dans les étapes suivantes, vous enlèverez le joint du bouton home, du panneau frontal de l'iPad. Ce joint est extrêmement fragile et peut se déchirer facilement. Si le joint ne se sépare pas facilement du panneau frontal, refaites-le chauffer à l'aide de l'iOpener avant de continuer.

Utilisez l'extrémité pointue d'un spudger pour retirer doucement l'ensemble du bouton home de l'écran.

Your contributions are licensed under the open source Creative Commons license.