Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
German

Translating step 9

Step 9
In the following steps, you will be separating the home button gasket from the iPad's front panel. This gasket is extremely delicate and can tear easily. If the gasket does not separate easily from the front panel, reapply heat using the iOpener before continuing. Use the pointed end of a spudger to gently pry the Home Button assembly up from the display. Use the pointed end of a spudger to gently pry the Home Button assembly up from the display.
  • In the following steps, you will be separating the home button gasket from the iPad's front panel. This gasket is extremely delicate and can tear easily. If the gasket does not separate easily from the front panel, reapply heat using the iOpener before continuing.

  • Use the pointed end of a spudger to gently pry the Home Button assembly up from the display.

In den folgenden Schritten wird die Dichtung des Home Buttons vom Frontpanel des iPad getrennt. Diese Dichtung ist äußerst empfindlich und reißt schnell. Wenn sie sich nicht leicht lösen lässt, musst du noch einmal Wärme mit Hilfe des iOpeners anwenden, bevor du weitermachst.

Benutze die Spitze des Spudgers um ganz vorsichtig die ganze Home Button Einheit vom Display abzuheben.

Your contributions are licensed under the open source Creative Commons license.