Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 37 guides that include this step.

English
French

Translating step 2

Step 2
Remove the following 6 screws:
  • Remove the following 6 screws:

  • Two 10 mm T6 Torx screws on either side of the RAM slot.

  • Four 14.5 mm Phillips screws along the hinge.

Dévissez les 6 vis suivantes :

Deux vis Torx T6 de 10 mm de chaque côté de l'emplacement de la RAM.

Quatre vis cruciformes de 14,5 mm le long de la charnière.

Your contributions are licensed under the open source Creative Commons license.