Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
French

Translating step 2

Step 2
Use the Pentalobe screwdriver to remove the two 3.6 mm Pentalobe screws near the dock connector. Use the Pentalobe screwdriver to remove the two 3.6 mm Pentalobe screws near the dock connector.
  • Use the Pentalobe screwdriver to remove the two 3.6 mm Pentalobe screws near the dock connector.

A l'aide du tournevis Pentalobe, retirez les deux vis Pentalobe de 3,6 mm près du connecteur de dock.

Evitez d'utiliser le tournevis Pentalobe 5 points trop souvent car il risque d'endommager les vis.

[* red] Use the Pentalobe screwdriver to remove the two 3.6 mm Pentalobe screws near the dock connector.
[* icon_caution] The 5-Point Pentalobe screwdriver should only be used a limited number of times because it has the potential to strip the screws.

Your contributions are licensed under the open source Creative Commons license.